Single Station Control, SS-1R
Standard with most Draper electrically operated screens.  3-position rocker switch accepts 115v current. Switch operation is sustained contact.  Complete with single-gang cover plate. UL listed.  See below for Access Sonata and Access MultiView switch information.  Also available in 220v current  Technical Data Sheet   Technical Data Sheet CE
115 Volt Multiple Station Controls, MS-3R, MS-4R
Identical in appearance to Single Station Control, above.  Automatic override allows only one signal to reach the motor when switches are operated simultaneously.  Also available in 220v current  Technical Data Sheet  

*Low Voltage Control Module (LVCIII)  and Switch (LVCS)
The most versatile control for your electric screens.  Order the LVC III low voltage control unit without switches (as an interface for a sophisticated master control system), or with one or more 3-button low voltage switches.
Switches have neutral decorator face plates for flush wall mounting.  The control unit is also equipped with jacks for easy connection to Draper RF and IR receivers.  Wiring from control unit to switches or receivers is lightweight for 24-volt current.  Optional for all Draper motorized screens, except Access Sonata.  Technical Data Sheet for LVCIII  Technical Data Sheet  for switch  

*Radio Frequency Remote Control, WRT/R
Hand-held transmitter. 3-button control lets you change direction or adjust format at any point.  Receiver plugs into the Draper low-voltage control unit. Technical Data Sheet  

*Infrared Remote Control, IRT/R
Infrared transmitter and receiver.  3-button operation for instant access to "up", "down", and "stop" functions.  Fully compatible with "learnable" IR master control systems.  Receiver plugs into the Draper low-voltage control unit, and must be ordered with it.  Technical Data Sheet  

Key Operated Power Supply Switch, KS-1
Useful with any control system for a Draper electrically operated projection screen--low voltage or 115v.  Switch mounts next to operating switch and controls power to it. Technical Data Sheet  

Locking Switch Cover Plate,  SP-KPS-I
115v 3-position control switch for limited access.  Cover plate and locking switch cover are brushed stainless steel.  Two keys furnished.  Technical Data Sheet

Key Operated 3-Position Switch
Similar to Draper’s standard 3-position control switch, but requires a key for operation.  115v control only.  Two keys furnished.  KS3 Technical Data Sheet  SP KSM Technical Data Sheet  Momentary

*Video Interface Control
Allows screen to be controlled by projector switch--when the projector comes on, the screen descends automatically.  Model VIC115 integrates screen operation with a Draper video projector lift, or a video projector or tuner with a 115v switched outlet.  Models VIC12 & VIC6 interface screen operation with a video projector or tuner featuring a 12v switched outlet.  The VIC115, VIC12 & VIC6 may be purchased with an override switch (VIC–OS), permitting independent operation.  A VIC is not compatible with an LVC-III, built-in or otherwise. 
Technical Data Sheet  VIC6, Technical Data Sheet  VIC12,  Technical Data Sheet  VIC115

Controls for Access Sonata
The standard control switch for the Access Sonata is a programmable low voltage 6-button wall switch that Draper presets with four format settings.  Change to any format at the touch of one button!  The Access Sonata standard control switch is compatible with the Sonata Infrared Remote Control Kit (ASON-IRT), and Sonata Projector Interface 12v and 6v (ASONPI-12 and ASONPI-6).

Controls for Access MultiView
Both screen and masking system are independently controlled, each using any standard or optional control offered above.  Two, SS-1R’s are standardly supplied.  Or, select AMV-C, a low voltage control that allows both motors to be controlled by independent 3-button switches in a single box.

*These optional controls may be factory-installed into the case of Access, Access MultiView & Ultimate Access/Series E and V, or Silhouette/Series E or V with no installation charge.  Built-in controls may increase length of case: call for exact dimension.  Choose either an LVC-III with or without a wireless transmitter, or choose a VIC.  LVC-III and VIC are not compatible on a single motor, built-in or otherwise.  Both may be used in an Access MultiView, which has two independently controlled motors.